Dunnage bag with smart valve - 150 x 240 cm - Level 1

“Level 1” dunnage pillow airbags are suitable for all trucks and containers transporting glass bottles, paper, barrels, and the majority of dry goods. The tear and wear-resistant dunnage bags are more cost-effective than conventional wooden stuffing material. Inflates in 50 seconds. Reusable.

How to use a dunnage airbag?

1. Open the cap and put the airbag between the goods. Warning: place the airbag at least 15 cm above the container deck to avoid friction and ensure that the airbag does not exceed the height of your load.

2. Connect the inflator to the valve and fill the airbag to the desired pressure. Then tighten the valve. You’re all set for transportation!

Reusing a pillow airbag

1. Unscrew the cap after use and push the valve in. It takes nearly a minute to empty the pillow.

2. Fold the airbag, then tighten the screw cap: your pillow airbag is ready for the next transportation.

Find out about our low-cost pallets, and ask for a cost estimation here!

Warning: The dunnage pillow airbag may have a logo. Therefore, they can differ visually - not functionally - from the image shown (in white).