Dunnage bag with smart valve - 90x180cm - Level 1

“Level 1” dunnage pillow airbag for all trucks and containers transporting glass bottles, paper, barrels and majority of dry goods. Tear and wear resistant, this pillow airbag is more cost-effective than conventional wooden tie-down means. Inflates in 50 seconds. Reusable.

How to use a pillow airbag?

1. Open the cap and put the airbag between the goods. Warning: place the airbag at least 15 cm above the container deck to avoid friction and ensure that the airbag does not exceed the height of your load.
2. Connect the inflator to the valve and fill the airbag to the desired pressure. Then tighten the valve. You’re all set for transportation!

How to reuse a pillow airbag?

Unscrew the cap after use and push the valve in. It takes nearly a minute to empty the pillow. Fold the airbag, then tighten the screw cap: your pillow airbag is ready the next transportation.

Find out about our low-cost pallets, ask for a cost estimation here!

Warning: The dunnage pillow airbag may have a logo. Therefore, they can differ visually - not functionally - from the image shown (in white).